Menu
EUR
Which primer should you use for plastic models and miniatures?

Which primer should you use for plastic models and miniatures?

By: Patrick van der Heijden Comments: 0

Short answer: for most plastic models and miniatures, choose a fine hobby primer in grey, as a spray can or for the airbrush. Good choices are Vallejo Surface Primer, Tamiya Fine Surface Primer Light Gray and The Army Painter Primer. Below you can read why you need primer, which type suits you and how to apply it properly.

Why primer first?

Acrylic paint adheres poorly to smooth plastic, resin or metal. A primer gives the surface a slight key so the paint stays put. A good primer also reveals small flaws, such as seams and sanding scratches, and gives your paint an even color to work on. That means you need fewer coats.

Why a hobby primer and not one from the hardware store?

The biggest difference is the pigment. Hobby primers for model building have very fine pigments, so the coat stays thin and smooth and even the smallest details remain visible. Primers from the hardware store have coarser pigments: they give a thicker, rougher coat that clogs fine details. Despite their lower price, that makes them less suitable for miniatures and model building.

Spray can, airbrush or brush?

Spray can: quick and easy

With a spray can, you can prime a whole army in a few minutes. Think of the Vallejo Surface Primer Grey (400ml), the Black or the White, the Tamiya Fine Surface Primer or the Citadel sprays. Want a base color straight away? Then choose a colored primer such as the Army Painter primers or the Vallejo Hobby Paint sprays.

Airbrush: the finest result

You can spray Vallejo Surface Primer in 18, 60 or 200ml bottles straight through the airbrush. The weather and temperature do not matter, and you can build up very thin coats. Ideal for scale models with fine details and for anyone who already owns an airbrush. Flush your airbrush thoroughly with Airbrush Cleaner straight afterwards: primer dries hard.

Brush: for touching up

You can also apply Vallejo Surface Primer with a brush, for example to touch up a spot the spray can missed. Apply two thin coats.

Which primer color?

  • Grey: neutral and shows flaws clearly. The safest choice if you are unsure.
  • Black: handy for dark models, metal and for anyone who works from dark to light. The recesses stay dark automatically.
  • White: needed under bright colors (yellow, red, orange) and under Contrast, Speedpaint and Xpress Color.
  • Colored: saves a coat if your whole army gets the same base color, such as German Dark Yellow for German vehicles.

A popular trick is zenithal priming: first everything black, then grey or white from above. That shows you straight away where the light and shadows fall.

How to prime without mistakes

  1. Clean: wash new resin or plastic miniatures in lukewarm water with a drop of washing-up liquid, and let them dry completely. This removes release agent and grease from your fingers.
  2. Remove seams: sand away seams with sanding tools and fill small holes with Vallejo Plastic Putty.
  3. Shake well: shake the spray can until you can clearly hear the agitator ball rattling around: 1 to 5 minutes, depending on how long the can has been unused.
  4. Distance and thin coats: spray from 20 to 30 cm away in short bursts. Two thin coats are better than one wet coat that clogs the details.
  5. Weather: do not spray in cold or humid conditions; you will get a grainy or powdery surface. Indoors, spray with extraction or in an airbrush station.
  6. Let it cure: let the primer dry thoroughly before you start painting: at least one hour for a thin coat, longer if you sprayed a thicker coat.

Common mistakes

  • Spraying too thick: details disappear. A second thin coat is better.
  • Too close: the primer runs and forms drips.
  • No primer under metallics: metallic paint adheres poorly to bare plastic.
  • Went wrong? With paint remover you can strip primer and paint from your model and start again.

Which primer is right for you?

Situation Our advice
Wargaming army, done fast Spray can Vallejo Grey or a colored Army Painter primer
Scale model with fine details Tamiya Fine Surface Primer or Vallejo Surface Primer through the airbrush
Contrast, Speedpaint, Xpress Color Vallejo Surface Primer White
You spray indoors or in winter Vallejo Surface Primer 200ml through the airbrush

At Scenery Workshop you will find all primers in the Primer category. Everything you see on the site is in stock with us. We ship on Monday, Wednesday and Friday. Order before 5:00 PM on one of those days and your parcel ships the same day. Shipping within the Netherlands and Belgium is free for orders over €100.

Choose your language
Select currency
€

Recently added

Total incl. tax
€0,00
Order for another €100,00 and receive free shipping
0
Compare

Leave a comment

Your email address will not be published

This product has been added to your cart