Kaleido ColorWorks RapidAir Green K006 is a water-based gloss acrylic paint in a 20ml. bottle, developed for airbrushing scale models and miniatures. The paint is pre-thinned, allowing you to work directly from the bottle with a suitable airbrush and build an even colour layer with a controlled spraying technique.
The shade can be described as green. Consider it for green vehicle panels, machinery and imaginative models when planning your next project. Within the Kaleido range, this colour belongs to Primary Colors. Record the official colour name and code on a test part beside your model. This gives you a useful reference when you return to the project for a repair, an additional component or another model in the same colour scheme.
Planning to paint green vehicle panels? Start with a clean test part and assess the shade over the same base that you intend to use on the model. This lets you judge both the colour and the gloss under your own lighting. For complex kits, painting separate components before assembly can help you reach edges and recessed areas with a more consistent spraying angle.
The RapidAir range focuses on a smooth paint layer during airbrushing. The manufacturer describes the formulation as addressing familiar water-based paint challenges, including beading and uneven coverage. This makes the colour a practical option for larger panels, while a controlled spraying movement also allows work on smaller surfaces. The final finish still depends on surface preparation, the air supply and how you apply the paint throughout the project.
Shake the bottle thoroughly before use. Pigment may settle during storage, and careful mixing helps restore an even distribution of colour and paint components. Add a small amount to the paint cup, then test the spray pattern. For its pre-thinned colours, Kaleido gives a 0.3–0.5mm. airbrush nozzle as a usage guideline. Adjust your approach to the airbrush you own and the size of the component you are painting.
Use steady, overlapping passes and check how much paint has reached the surface after each pass. Keep application controlled so panel lines, edges and small details remain visible. If additional thinning is needed, introduce a suitable thinner gradually and test again. There is no single mixing ratio for every project: the nozzle, spraying distance, working conditions and intended layer build all influence the result you see on the model.
The gloss finish is useful when you want smooth-looking bodywork or cleanly finished model panels. Plan the next stages, such as decals, panel lining or a final protective varnish, before committing to the complete build. Allow the colour layer to dry adequately and test combinations with other products on a spare part. This lets you assess the finish before treating the most prominent visible surface of your model.
The manufacturer recommends a storage and working temperature of 5–40°C, with relative humidity below 80% for spraying and drying. Choose an appropriate workspace and keep the painted model free from dust as the layer dries. Close the bottle after dispensing and clean the airbrush after use. This keeps leftover colour out of the next spraying session and makes a multi-stage painting workflow easier to manage.
For beginners, the pre-thinned formulation offers a practical starting point: you can focus first on learning the spray pattern and your hand movement. Experienced model builders can integrate the colour into an established workflow involving separate panels, contrasting accents and a planned finish. Whether you are painting a display model or a miniature, a test part helps connect your colour choice with the appearance you want to achieve in the finished project.
Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.
