General Purpose Cyanoacrylate 401. Fast drying, extra strong, low viscosity, special formula for bonding between materials, even those with an acidic surface. Can be used with rubber, leather, wood, metal, resin and plastic.

The surfaces to be bonded must be free from dirt, dust and grease. A small amount of glue should be applied; more cyanoacrylate does not guarantee better adhesion and makes drying of the glue sufficient for gluing more difficult.

• Ethyl cyanoacrylate
• Operating temperature: -48 to 48 ºC
• Setup time: between 3 and 10 seconds. Seams and uneven surfaces can increase this setup time. It is not necessary to use clamps. If you hold the parts to be glued firmly for 10-30 seconds, you will ensure better adhesion.
• Final curing time: 24 hours
• Viscosity: 110 mPa. S
• Shear strength: 21.0 MPa

* Bottles are not filled completely to leave some air for proper operation.