Kaleido ColorWorks RapidAir Metallic Racing Red K303 is a water-based gloss metallic acrylic paint in a 20ml. bottle, developed for airbrushing scale models and miniatures. The paint is pre-thinned, allowing you to work directly from the bottle with a suitable airbrush and build an even colour layer with a controlled spraying technique.
The shade can be described as metallic racing red. Consider it for red sports cars, metallic bodywork and racing panels when planning your next project. Within the Kaleido range, this colour belongs to Auto Colors. Record the official colour name and code on a test part beside your model. This gives you a useful reference when you return to the project for a repair, an additional component or another model in the same colour scheme.
Planning to paint red sports cars? Start with a clean test part and assess the shade over the same base that you intend to use on the model. This lets you judge both the colour and the gloss under your own lighting. For complex kits, painting separate components before assembly can help you reach edges and recessed areas with a more consistent spraying angle.
The metallic effect give the painted surface a different appearance from a plain solid colour. Examine a test part from several angles and under the lighting in which you plan to display the model. A dark or light base can influence how the finish is perceived. Use the same base and spraying approach for neighbouring panels to keep the overall appearance visually consistent.
Shake the bottle thoroughly before use. Pigment may settle during storage, and careful mixing helps restore an even distribution of colour and paint components. Add a small amount to the paint cup, then test the spray pattern. For its pre-thinned colours, Kaleido gives a 0.3–0.5mm. airbrush nozzle as a usage guideline. Adjust your approach to the airbrush you own and the size of the component you are painting.
Use steady, overlapping passes and check how much paint has reached the surface after each pass. Keep application controlled so panel lines, edges and small details remain visible. If additional thinning is needed, introduce a suitable thinner gradually and test again. There is no single mixing ratio for every project: the nozzle, spraying distance, working conditions and intended layer build all influence the result you see on the model.
With effect paint, the finishing stage contributes to the appearance of the completed model. A glossy surface shows reflections more clearly, while a later matte varnish can change the visible sheen. Make a test part using the complete sequence you intend to apply. If you want a black gloss base, consider Kaleido Gloss Black Primer and check the result of combining it with this shade on that test part.
The manufacturer recommends a storage and working temperature of 5–40°C, with relative humidity below 80% for spraying and drying. Choose an appropriate workspace and keep the painted model free from dust as the layer dries. Close the bottle after dispensing and clean the airbrush after use. This keeps leftover colour out of the next spraying session and makes a multi-stage painting workflow easier to manage.
For beginners, the pre-thinned formulation offers a practical starting point: you can focus first on learning the spray pattern and your hand movement. Experienced model builders can integrate the colour into an established workflow involving separate panels, contrasting accents and a planned finish. Whether you are painting a display model or a miniature, a test part helps connect your colour choice with the appearance you want to achieve in the finished project.
Kaleido Colorworks
Kaleido Colorworks
Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.
